|
|
Professor Qinghua Qin BEng Xi'an MSc PhD HUST
Phone - (61 2) 6125 8274 Fax - (61 2) 6125 5476 E-mail – qinghua.qin@anu.edu.au Postal Address- College
of Engineering and Computer Science Ian Ross Building 31, North Road Australian National University, Acton, ACT 2601, Australia. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Qing-Hua Qin was born in Yongfu County, Guangxi province of China. He received his Bachelor of Engineering degree in mechanical engineering from Xi’an Highway University (currently Chang An University), China in 1982, earning his Master of Science degree in 1984 and Doctoral degree in 1990 from Huazhong University of Science and Technology (HUST) in China. Both degrees are in applied mechanics. He joined the Department of Mechanics at HUST in 1984. After spending 10 years lecturing at HUST, he was awarded the DAAD/K.C. Wong research fellowship in 1994, which enabled him to work at the University of Stuttgart in Germany for nine months. In 1995 he left HUST to take up a postdoctoral research fellowship at Tsinghua University, China, where he worked until 1997. He worked as a Queen Elizabeth II fellowship in 1997 at the University of Sydney and a Professorial fellowship in 2004 at the Australian National University, both sponsored by the Australian Research Council. He was appointed a guest professor at HUST in 2000. He was also awarded a Cheung Kong Professorship at Tianjin University in 2001 from the Ministry of Education of China. He has published more than 300 journal papers and 8 books in the field of applied mechanics and was a recipient of the J.G. Russell Award from the Australian Academy of Science. |
Qualifications
1982 BEng in Mechanical Engineering, Xi’an Highway University, Xi’an,
Thesis: Design for a 20T-concrete rotary mixer, Bachelor thesis
1984 MSc. in Applied Mechanics, Huazhong University of Science and Technology (HUST), Wuhan
Thesis: Finite element analysis of aluminium electrolyzer structures
1990 PhD in Applied Mechanics, Huazhong University of Science and Technology, Wuhan,
Thesis: Variational principles, finite element and boundary element analysis for finite deformation of plates and shells
2001 Graduate certificate in Management Communication, NSW Technical and Further Education Commission
2008 Graduate certificate in Higher Education, ANU
Courses taught
Research areas
· Professor, RSEEME, Australian National University, Australia, since 2007
· ARC QE II Fellow, School of AMME, University of Sydney, Australia, 1997-2002.
· Postdoctoral fellow, Dept. of Eng. Mechanics, Tsinghua University, Beijing, China, 1995-1997.
· Lecturer, Department of Mechanics, HUST, Wuhan, China, 1984-1995.
1) Projects in which I am Lead CI 1995 Chinese Education Committee Foundation for Scholars returning from abroad, on “Fracture mechanics of piezoelectric materials” (REM$25,000) 1996 Chinese Education Committee Postdoctoral Foundation, on “Interfaces and their influences on piezoelectric composites” (REM$5000 & US$1000) 1997 ARC Queen Elizabeth II Fellowship project on “Theoretical and experimental studies on the micro-defect-weakened- piezo- thermoelastic materials”, (1997-2001, AU$388608, Grant No. F89700665) 1999 ARC Institutional small grant, on “Dynamic fracture and damage analysis of piezoelectric and functionally gradient materials” (AU$17,000) 2000 ARC large grant, on “Thermo-electro-mechanical analysis of advanced microelectronic packages” (2000-2002, AU$192,836, Grant No. A10009133) 2001 Sesqui R&D Scheme of the University of Sydney, on “Thermoelectroelastic analysis of bone remodelling process” (AU$26,000) 2002 ARC Discovery-Project (Professorial Fellowship), on “Thermo-electro-chemo-mechanical properties of biological systems” (2002-2006, approved funding: AU$686,825; Actually received $741657, Grant No. DP0209487) 2004 ARC Discovery-Project, on “Rheological and electrical properties of biological soft tissues” (2004-2006, AU$249,000, with Z Liu and Y Yu, DP0451097) 2005 Faculty Research Grant Scheme of FEIT, ANU for new start on “Thermoelectroelastic theory of bone remodelling process” (AU$5000) 2006 ARC Discovery-Project, on “Theoretical
and experimental studies on magnetoelectroelastic bone remodelling process” (2006-2008, AU$260,000, with S Kalyanasundaram, DP0665941) 2007 AIS – Scholarship Agreement on “Optimisation of a respiratory gas analysis system for use with high-performance athletes” (2007-2008, $24000) 2008 Australian Leadership Awards Fellowship Grant on “A study of challenging mechanics problems in exploiting water power”, Australian Agency for International Development (AusAID), Fund provider Ref No. 46118 (2008, $28160) 2013 ARC Linkage Project, Rapid process development for the assembly of lightweight metal components, (Grant No. LP130101001, 2013-2016, AUD$310,000, with Matthew C Doolan, Paul Compston, Michael J Cardew-Hall, Richard A Taube) 2013 ARC Discovery-Project, Finite element and optimization methods for creating complex structure in additive manufacturing (Grant No. DP140103137; 2014-2016; AUD$380,000; with Prof Roderick Boswell) 2015 ARC Discovery-Project, Topology optimisation of mechanical metamaterials with additive manufacture (Grant No. DP160102491; 2016-2018; AUD$340,000; with Dr Zhen Luo) 2016 ANU Major Equipment Committee Grant on “Designable User-Based Laser Sintering Facility: Additive Manufacturing of Advanced Materials” (2016, AU$142,000, with Rachel W. Li, Paul N. Smith, Yuan Chai, Khu Vu; MEC grant number: 16MEC30) 2) Projects in which I am a Partner Investigator or non-lead CI 2002 Tianjin University Key project ‘21st Century Education Promotion programme’, on “Study on mechanics of smart biomaterials” (with YL Kang, 2002-2006, RMB$2million) 2005 National Natural Science Foundation of China, Coupled multi-field theory and mechanical behaviour of piezoelectric biomaterials (Grant No. 10472082; 2005-2007: RMB$290,000) 2007 CityU Strategic Research Grant on “Theoretical Study on Cancellous Bone Modelling and Remodelling under Electro-magneto-elsatic Field” (City University of Hong Kong, No. 7002076; Apr 1 2007–Mar 31, 2009; Principle Investigator: Xiaoqiao He, Co-Investigator: Qinghua Qin; HK$179,464) 2007 ANU Major Equipment Committee Grant on “Mechanical test facility for microtesting of biological/nanostructured materials” (2007, AU$186,876, with A Lowe, S Kalyanasundaram, and RE Williamson; ANU file No. 200711619; MEC grant number: 07MEC11) 2009 ANU Major Equipment Committee Grant on “A couple micro-/nano-scale imaging and polarisation charactersation facility” (2009, AU$400,000, with Y Liu, RL Withers, JW White, R Welberry, RP Wang, DJ Goossens, MG Humphrey, L Fu; MEC grant number: 09MEC21) 2012 National Natural Science Foundation of China, on Mechanics on chirality transfer in nanomaterials with hierarchy of chirality (Grant No. 11272230; 2013-2016; RMB$880,000; with Dr Jianshan Wang and Dr Hui wang) 2013 National Natural Science Foundation of China, Interfacial mechanics and optimization approach for biological coating materials in additive manufacturing (Grant No. 11372100, 2014-2017, RMB$900,000) 2013 ARC LIEF Grant, An Australasian facility for the automated fabrication of high performance bespoke components (Grant No. LE140100082, AUD$500,000 for 2014; with Prusty, A/Prof Gangadhara B; Compston, A/Prof Paul; Tong, Prof Liyong; Kwok, Prof Kenny C; Fox, A/Prof Bronwyn L; Tang, Dr Youhong; Ojeda Rabanal, Dr Roberto E; Bhattacharyya, Prof Debes; St John, Dr Nigel A; Beehag, Dr Andrew; Sterbic, Mr Mark; Uy, Prof Brian; Sahajwalla, Prof Veena; Pearce, Dr Garth; Morozov, Prof Evgeny V; Ye, Prof Lin; Rasmussen, Prof Kim J; Mashiri, Dr Fidelis R; Das, Dr Rajarshi; Wildy, Dr Stuart J) 2017 National Natural Science Foundation of China, Mechanical analysis and optimization of elastic metamaterials for vibration and seismic wave attenuation (Grant No. 11772204, 2018-2021, RMB$680,000) |
1) Editorial boards · Editor-in-Chief, International
Journal on Engineering Applications (2013-) ·
Editor-in-Chief, Advances
in Biomaterials Research (2017-) ·
Editor-in-Chief, AIMS Materials Science
(2019-) ·
Member of editorial
board, Functional
Materials Letters (2018-) ·
Member of editorial board, Chinese Journal of
Computational Mechanics (2003-2006) · Editor, International
Journal of Tomography and Simulation
(2005-) · Member of editorial
board, Journal
of Mechanics and MEMS (2008-) · Member of editorial board, Applied Mathematical Sciences
(2009-) · Member of
Editorial Advisory Board, Recent Patents on Space Technology (2009-2015) ·
Associate Editor, Australian Journal of
Mechanical Engineering (2010-2012) • Member of
Editorial Advisory Board, International
Journal of Architecture, Engineering and Construction
(2011-2014) • Member of
editorial board, Journal Science
and Military(2011-2014) • Member of
editorial board, Acta
Mechanica Solida Sinica, (2011-) ·
Member of editorial
board, Engineering
Analysis with Boundary Elements, (2012-) ·
Editorial Board Member, International
Journal of Mechanics and Applications (2012-) ·
Editorial Board Member,
Journal of Applied Mechanical Engineering (2012-2018) ·
Associate Editor, The Open Numerical Methods
Journal (2013-2014) ·
Associate Editor, The Open Mathematics Journal
(2014-2018) ·
Editorial Board Member,
Journal of Advanced
Mechanical Engineering (2014-) ·
Regional Editor, Recent
Patents on Mechanical Engineering (2015-2019) ·
Editorial Board Member,
International Journal of Molecular Sciences (2015-2018) ·
Co-Chief Editor, Book Series on Advanced Materials
and Mechanics, Higher Education Press and Springer, (2010-) · Guest Editor, Special Issue on “BEM in
China”, Engineering Analysis with Boundary Elements, 28(8), 903-995, 2004 ·
Guest Editor, Special Issue in Celebration of Professor Shouwen
Yu's 70th Birthday with W Yang and XQ Feng), Acta Mechanica
Solida Sinica, 22(5),
377-509, 2009 2) Professional
services ·
Fellow, Institution of
Engineers Australia (elected in 2007-2018) · Chair, National Conference on Smart
Materials & Structures, Tianjin, China, 10-12 April, 2003 · Member of International Scientific Committee of the Global
Chinese Workshop on Boundary Element
and Meshless Methods, 4th-6th September 2003, Qinhuangdao, China · Member of Advisory Committee, 9th
International Conference on Inspection, Appraisal, Repairs and Maintenance of Structures, 19th-21st October 2005, Fuzhou, China ·
Member
of Scientific Committee, the 5th International
workshop on Trefftz Methods, March31~April 1, 2008, Leuven, Belgium · Referee for Marden Fund Council of New
Zealand (2003, 2004); · Int-reader for ARC (expert assessor of
international standing), 2005- ·
Referee of Changjiang Scholar Programme for the
Ministry of Education of China, 2007 ·
Referee of National Natural Science Foundation of
China, 2008 ·
Co-Chair, Workshop
on Damage, Fracture and Micro/Nano Mechanics (WDFM-2009), August 20-22, 2009, Beijing, China (Chairmen: Wei
Yang, Xiqiao Feng, Qinghua Qin) ·
Member
of International Organizing Committee,
The
Third Asia-Pacific International Conference in Computational Methods in Engineering
2009 (ICOME2009), October 18-20, 2009, Nanjing, China. ·
Member of Local Academic Promotions Committee,
College of Engineering and Computer Science, ANU, 2009 ·
Member of the Engineering Curriculum Development
Committee, College of Engineering and Computer Science, ANU, 2010~2013 ·
Member of the College Research Committee, College
of Engineering and Computer Science, ANU, 2011~2013 ·
Member of the College Education Committee,
College of Engineering and Computer Science, ANU, 2011~2013 ·
Member of Scientific Advisory Committee, International Conference
on Boundary Element and Meshless Techniques, 12-14 July 2010, Berlin,
Germany ·
Member of Scientific Advisory Committee, the 2nd International Conference on Nanomechanics
and Nanocomposites, October 10-13, 2010, Beijing, China ·
Member of IAS Working Group, College of Engineering and Computer Science, ANU,
2010 ·
Member of Scientific
Advisory Committee, 12th International Conference on
Boundary Element Techniques, 13-15 July 2011, Brasilia,
Brazil · Member of Scientific Committee, Joint International Workshop on Trefftz Method VI and Method of Fundamental Solution II, National Sun Yat-sen
University, Kaohsiung, March 15-18,2011 · Member of Scientific Committee, Global
Chinese Workshop in conjunction with 10th National Conference on Computational Methods in Engineering, May 25-28, 2012,
Changsha, China · Member of Local Organizing Committee, The
4th International Conference on Smart Materials and Nanotechnology in Engineering (SMN 2013), 10-12 July 2013, Gold
Coast, Australia · Member of International Organization
Committee, 4th Asia Pacific Congress on Computational Mechanics & 2nd International Symposium on Computational
Mechanics, 11 – 14 Dec. 2013, Singapore. · Member of Scientific Advisory Committee,
the 14th International Conference on Boundary Element and Meshless Techniques, 16-18th July 2013, Paris, France · Member of International Scientific
Committee, the 13th International Conference on Fracture (ICF13), June 16–21, 2013 in Beijing, China (Session chair: Session 33,
Multi-field Coupling) · Member of International Scientific and
Advisory Board, The 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2013), Johor Bahru, Malaysia
on 4 – 6 December 2013. · Member of International Scientific
Advisory Committee, 36th International Conference on Boundary Elements and Other Mesh
Reduction Methods, 22 - 24 October, 2013, Dalian, China · Member of Organisation Committee, First
Australasian Conference On Computational Mechanics (3-4 October 2013, Sydney), · Member of International Scientific and
Advisory Board, 1st Internatonal Materials,
Industrial, and Manufacturing Conference (MIMEC2013) Johor Bahru, Malaysia,
December 4-6, 2013 · Co-Chair, iSoGO
Symposium on Interdisciplinary Computation and Optimization; December 20-25, 2014, Huangshan Hot Spring Hotel,
The Yellow Mountains, China · Member of International Organization
Committee, The 5th International
Conference on Computational Methods (ICCM2014), Cambridge, England, July 28, 2014 – July 30, 2014 · Member of International Scientific
Committee, ICOME2015, The
5th Asia-Pacific International Conference on Computational Methods in Engineering and the 11th
Chinese National Conference on Computational Methods in Engineering; Joint International Conference on Trefftz
Method VII and Method of Fundamental Solutions III, Hangzhou, China, October 11-13,
2015 · Member of International Scientific
Committee, International Conference of Emerging Trends in Applied Mathematics and Mechanics, May 30 - June 3, 2016, Perpignan,
France · Member of Scientific Committee, The 2nd
Australasian Conference on Computational Mechanics, Brisbane, Nov 30 to Dec 1 2015 · Member of International Scientific
Committee, The 6th International Conference on Computational Methods, July 14-17th, 2015, Auckland, New Zealand. · Member of International Organizing
Committee, the First International Conference for Sustainable Development and Management (ICSDM), 28-30 June 2015, Hong Kong · Co-Chair, International Conference on
Advances in Construction Machinery and Vehicle Engineering 2015, 18-20 September 2015, Xi’an, Changan University, China · Program Committee Chair, 2016 International
Conference on Design, Mechanical and Material Engineering (D2ME 2016), September 8-10,
2016 Auckland, New Zealand · Co-Chair, 2017 2nd International
Conference on Design, Mechanical and Material Engineering (D2ME 2017), Melbourne, Australia, from
September. 7-10, 2017 · Co-Chair, Symposium on Interdisciplinary
Computing and Optimization (SICO-2017) July 21-25, 2017, Federation University, Ballarat, Australia · Co-Chair, 2018 3nd International Conference on
Design, Mechanical and Material Engineering (D2ME 2018), Phuket, Thailand, from
September. 27-29, 2018 ·
Papers reviewed
for more than 20 international journals |
1) Books
2) Papers
|
Copyright©
Materials and
Manufacturing Group, School of Electrical, Energy and Materials Engineering
Last Updated: 29 December 2020
For more information please contact: Professor Qinghua Qin
The Australian National University — CRICOS Provider Number 00120C